It looks great but the feet are already rusting and it is only day 2 so not so sure about the water resistant. But really pretty
Wio Terminal Lorawan Field Tester Kit Helium Network
WIO TERMINAL LORAWAN FIELD TESTER KIT HELIUM NETWORK
Wio LoRaWAN FieldTester is a plug-and-play LongFi network monitor for Helium, allowing for real-time tracking and mapping of network coverage for professional and industrial applications. It helps to ensure optimal placement of sensors in desired areas for long-term value.
Note: Please note that if you flash a different firmware on the device, you would have a risk of losing the device configuration.
With Wio Terminal LoRaWAN Field Tester + Wio Terminal Battery Chassis, you can stack everything in a compact.
FEATURES
Ready to go Wio Terminal LoRaWAN Field Tester. No setup, just power it on! The included communication allows a normal use for 3 to 5 years.
Compact size, support Type C power bank charge to bring the device everywhere.
Monitor the LongFi network performance from the field to verify the coverage and know the different Gateways / Hotspots covering a given place.
Find the best places to deploy new Gateways / Hotspots.
Directly display network and GPS information on the Wio Terminal screen
Applications
The WioLoRaWanFieldTester provides different features, all-in-one:
Field Tester - it allows to monitor the LoRaWan / LongFi network performance from the field. That way you can verify the coverage and know the different Gateways / Hotspots covering a given place. It helps to find the best places to deploy new Gateways / Hotspots, compare different places to optimize the network deployment. It can show signal strength in real-time and allows the testing of different network parameters.
Mapper - it automatically transfers the positions to the network mappers - Helium Mappers and Coverage Map - to create a map of coverage. This map is really important to understand where it is possible to use the network. It is a key point for giving trust to the network and motivating the service providers to use it.
Tracker - it can be connected to tracking services like cargo to track cars, people, assets in real-time.
Multi-zone: suports EU868, AS923, US915, KR920, IN865, AU915
Friendly to developers: compatible with over 300 Plug&Play Grove modules to create IoT nodes. The firmware is open-source and can be upgraded like moving a file to a directory.
SPECIFICATIONS
|
Main Chip |
Manufacturer Part Number |
ATSAMD51P19 |
|
Core Processor |
ARM® Cortex®-M4F running at 120MHz |
|
|
Memory |
4 MB External Flash, 192 KB RAM |
|
|
Maximum Speed |
200MHz |
|
|
External Flash |
4MBytes |
|
|
Operating Temperature |
-40°C ~ 85°C (TA) |
|
|
LCD Screen |
Resolution |
320x240 |
|
Display Size |
2.4inch |
|
|
Drive IC |
ILI9341 |
|
|
Wireless Connectivity |
Manufacturer Part Number |
RTL8720DN |
|
KM4 CPU |
ARM® Cortex®-M4F @ 200MHz |
|
|
KM0 CPU |
ARM® Cortex®-M0 |
|
|
Wi-Fi |
802.11 a/b/g/n 1x1, Dual Band 2.4GHz & 5GHz |
|
|
Bluetooth |
Support BLE5.0 |
|
|
Built-in Modules |
Accelerometer |
LIS3DHTR |
|
Microphone |
1.0V-10V -42dB |
|
|
Speaker |
≥78dB @10cm 4000Hz |
|
|
Light Sensor |
400-1050nm |
|
|
Infrared Emitter |
940nm |
|
|
Interface |
MicroSD Card Slot |
Maximum 16GB |
|
GPIO |
40-PIN (Raspberry Pi Compatible) |
|
|
Supported Protocol |
SPI, I2C, I2S, ADC, DAC, PWM, UART(Serial) |
|
|
Grove |
2 (Multifunction), for Digital, Analog, I2C, and PWM |
|
|
FPC |
20-Pins |
|
|
USB Type-C |
Power & USB-OTG |
|
|
Operation Interface |
5-Way Switch |
|
|
Power/Reset Switch |
||
|
User-defined button *3 |
||
|
Enclosure |
Mouting |
Built-in magnets and two mounting holes |
|
Dimension |
72mm*57mm*12mm |
|
|
Materials |
ABS+PC |
|
|
Software Support |
Arduino |
|
|
MicroPython |
||
| ArduPy | ||
|
AT Firmware |
||
|
Visual Studio Code |
||
Wio Terminal LoRaWan Chassis with Antenna
|
Parameters |
Specifications |
|
|
Voltage - supply |
3V3 |
|
|
LoRa-E5 |
Frequency |
EU868 / US915 / AU915 / AS923 / KR920 / IN865 |
|
Protocol |
LoRaWAN |
|
|
Sensitivity |
-116.5dBm ~ -136dBm |
|
|
modulation |
LoRa, (G)FSK, (G)MSK, BPSK |
|
|
Quectel L76-LB |
Receiving Bands |
GPS L1/Galileo E1 C/A: 1575.42MHz GLONASS L1 C/A: 1602.5625MHz BeiDou B1 C/A: 1561.098MHz |
|
Channel |
33 Tracking Channels 99 Acquisition Channels 210 PRN Channels |
|
|
Sensitivity |
Acquisition: -148dBm Tracking: -165dBm Reacquisition: -160dBm |
|
|
Interfaces |
Wio Terminal 40-PIN(2x20 Male Headers) |
|
|
Enclosure |
Dimension |
72mm*57mm*12mm |
|
Materials |
3D Printing with ABS |
|
PACKAGE CONTENT
1 x Wio Terminal Lorawan Field Tester Kit Helium Network
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Shipping & Returns
FREE Shipping in Australia - Dispatch 1-2 days
Shipping Information:
- Free Shipping Australia-Wide: Excluding Bulky Items (Outside Metro Area)
- New Zealand Shipping: A flat fee will be applied at checkout for shipping to New Zealand.
- Fast Deliveries: We ensure prompt delivery right to your door.
- Order Processing: Orders are typically processed within 1-2 business days. You will receive a confirmation email with tracking information once your order has shipped.
- Shipping Times: Delivery times vary depending on your location. Most orders within Australia arrive in 3-8 business days.
Returns Information:
- Easy Returns: We want you to be completely satisfied with your purchase. If you are not happy with your item, you can return it within 30 days of receipt.
- Return Conditions: Items must be returned in their original condition, unopened box, unworn and with all tags attached.
- Refund Process: Once we receive your return, we will process your refund less shipping/restocking fees within 3-5 business days to the original method of payment.
- Return Shipping: Customers are responsible for return shipping costs unless the item is faulty or incorrect.
- How to Return: To initiate a return, please contact our customer service team with your order number and reason for return. They will provide you with further instructions.
